[mpich-discuss] Running configure on Suse Enterprise 10

[Rajeev Thakur]

The build seems to have completed, although it detected clock skew. Try running the cpi example in the examples directory.

Rajeev

On Jul 5, 2013, at 9:43 AM, anton.s.murfin at sellafieldsites.com wrote:

> 
> Hi Jeff, Bill 
> 
> Thank you for your help. I have disabled f77 and f90 as you suggest using 
> 
> ./configure --prefix = /home/ris3/asm7/mpich-3.0.4_build 2>&1 --disable-fc --disable-f77 |tee c_dis_f77_f90.txt 
> 
> This did provide a successful outcome interms of a Makefile. However, when trying either; 
> 
> make 2>&1 |tee m_dis_f77_f90.txt 
> 
> or 
> 
> make 2>&1 V=1 |tee m_dis_f77_f90.txt 
> 
> the code failed to compile. 
> 
> See attached config_dis_f77_f90.log and m_dis_f77_f90.txt for details. 
> 
> You may also have seen the email from Bill regarding the integer issue so I will send the appropriate config.log file too. 
> 
> Regards, 
> 
> Anton 
> 
>   
> 
> 
> 
> Jeff Hammond <jeff.science at gmail.com> 
> Sent by: discuss-bounces at mpich.org
> 05/07/2013 14:07
> Please respond to
> discuss at mpich.org
> 
> To
> "discuss at mpich.org" <discuss at mpich.org>
> cc
> Subject
> Re: [mpich-discuss] Running configure on Suse Enterprise 10
> 
> 
> 
> 
> 
> Disable Fortran if you don't have a Fortran compiler.  The options are shown with the help invocation.  
> 
> Jeff
> 
> Sent from my iPhone 
> 
> On Jul 5, 2013, at 6:15 AM, "anton.s.murfin at sellafieldsites.com" <anton.s.murfin at sellafieldsites.com> wrote:
> 
> 
> Dear MPICH developers, 
> 
> I have downloaded and extracted mpich-3.0.4.tar.gz to /home/ris3/asm7/mpich-3.0.4/ 
> 
> I then created a build directory as /home/ris3/asm7/mpich-3.0.4_build/ 
> 
> I went back to /home/ris3/asm7/mpich-3.0.4/  and executed the .configure script detailed below 
> 
> ./configure --prefix = /home/ris3/asm7/mpich-3.0.4_build 2>&1 | tee c.txt  (I confirmed I was using bash shell, using echo $SHELL) 
> 
> The output from this c.txt is attached and there is only one error right at the bottom although there are some warnings. 
> 
> No Makefile is created so the next step make doesn't work. 
> 
> I just wanted to see if you can see what the issue is. 
> 
> Many thanks 
> 
> Anton 
> 
> "The information contained in this email may be commercially sensitive and/or legally privileged. It is intended solely for the person(s) to whom it is addressed. If you are not a named recipient, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. You must not disclose it to any other person, copy or distribute it or use it for any purpose. 
> 
> Views expressed in this email are not necessarily those of Sellafield Ltd.
> 
> Sellafield Ltd, a company owned by Nuclear Management Partners Ltd, is registered in England and Wales, Company number 1002607. The registered office is situated at Booths Park, Chelford Road, Knutsford, Cheshire WA16 8QZ."
> 
> <c.txt> 
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss_______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
> 
> *****************************************************************************
> This message was received by the Sellafield.Site Internet Email Gateway 
> 
> and was checked for Viruses and SPAM by the MessageLabs Email Management Service.
> Please forward any suspicious or unwanted emails to "Spam Helpdesk" 
> *****************************************************************************
> 
> 
> 
> "The information contained in this email may be commercially sensitive and/or legally privileged. It is intended solely for the person(s) to whom it is addressed. If you are not a named recipient, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. You must not disclose it to any other person, copy or distribute it or use it for any purpose. 
> 
> Views expressed in this email are not necessarily those of Sellafield Ltd.
> 
> Sellafield Ltd, a company owned by Nuclear Management Partners Ltd, is registered in England and Wales, Company number 1002607. The registered office is situated at Booths Park, Chelford Road, Knutsford, Cheshire WA16 8QZ."
> 
> <config_dis_f77f90.log><m_dis_f77_f90.txt><c_dis_f77_f90.txt><config.log>_______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss