[mpich-discuss] install + config on windows

Jayesh Krishna jayesh at mcs.anl.gov
Fri May 3 12:08:25 CDT 2013 

Hi,
 From the log output it looks like credentials (password) for Utilisateur was not correct.
 Is Utilisateur a valid Windows user on your machine? Have you registered the username/password correctly (Try re-registering the username+password by typing "mpiexec -register" at the command prompt)?

Regards,
Jayesh

----- Original Message -----
From: "spatiogis" <geo at spatiogis.fr>
To: discuss at mpich.org
Sent: Friday, May 3, 2013 11:58:00 AM
Subject: Re: [mpich-discuss] install + config on windows

Hello,

	for this command :

	# C:\Progra~1\MPICH2\bin\mpiexec -verbose -n 2  
C:\Progra~1\MPICH2\examples\cpi.exe

	result :

	....../SMPDU_Sock_post_readv
...../SMPDU_Sock_post_read
..../smpd_handle_op_connect
....sock_waiting for the next event.
....\SMPDU_Sock_wait
..../SMPDU_Sock_wait
....SOCK_OP_READ event.error = 0, result = 0, context=left
....\smpd_handle_op_read
.....\smpd_state_reading_challenge_string
......read challenge string: '1.4.1p1 18467'
......\smpd_verify_version
....../smpd_verify_version
......Verification of smpd version succeeded
......\smpd_hash
....../smpd_hash
......\SMPDU_Sock_post_write
.......\SMPDU_Sock_post_writev
......./SMPDU_Sock_post_writev
....../SMPDU_Sock_post_write
...../smpd_state_reading_challenge_string
..../smpd_handle_op_read
....sock_waiting for the next event.
....\SMPDU_Sock_wait
..../SMPDU_Sock_wait
....SOCK_OP_WRITE event.error = 0, result = 0, context=left
....\smpd_handle_op_write
.....\smpd_state_writing_challenge_response
......wrote challenge response: 'dafd1d07c1e6e9cb5fae968403d0d933'
......\SMPDU_Sock_post_read
.......\SMPDU_Sock_post_readv
......./SMPDU_Sock_post_readv
....../SMPDU_Sock_post_read
...../smpd_state_writing_challenge_response
..../smpd_handle_op_write
....sock_waiting for the next event.
....\SMPDU_Sock_wait
..../SMPDU_Sock_wait
....SOCK_OP_READ event.error = 0, result = 0, context=left
....\smpd_handle_op_read
.....\smpd_state_reading_connect_result
......read connect result: 'SUCCESS'
......\SMPDU_Sock_post_write
.......\SMPDU_Sock_post_writev
......./SMPDU_Sock_post_writev
....../SMPDU_Sock_post_write
...../smpd_state_reading_connect_result
..../smpd_handle_op_read
....sock_waiting for the next event.
....\SMPDU_Sock_wait
..../SMPDU_Sock_wait
....SOCK_OP_WRITE event.error = 0, result = 0, context=left
....\smpd_handle_op_write
.....\smpd_state_writing_process_session_request
......wrote process session request: 'process'
......\SMPDU_Sock_post_read
.......\SMPDU_Sock_post_readv
......./SMPDU_Sock_post_readv
....../SMPDU_Sock_post_read
...../smpd_state_writing_process_session_request
..../smpd_handle_op_write
....sock_waiting for the next event.
....\SMPDU_Sock_wait
..../SMPDU_Sock_wait
....SOCK_OP_READ event.error = 0, result = 0, context=left
....\smpd_handle_op_read
.....\smpd_state_reading_cred_request
......read cred request: 'credentials'
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
.......\smpd_option_on
........\smpd_get_smpd_data
.........\smpd_get_smpd_data_from_environment
........./smpd_get_smpd_data_from_environment
.........\smpd_get_smpd_data_default
........./smpd_get_smpd_data_default
.........Unable to get the data for the key 'nocache'
......../smpd_get_smpd_data
......./smpd_option_on
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
......\SMPDU_Sock_post_write
.......\SMPDU_Sock_post_writev
......./SMPDU_Sock_post_writev
....../SMPDU_Sock_post_write
...../smpd_handle_op_read
.....sock_waiting for the next event.
.....\SMPDU_Sock_wait
...../SMPDU_Sock_wait
.....SOCK_OP_WRITE event.error = 0, result = 0, context=left
.....\smpd_handle_op_write
......\smpd_state_writing_cred_ack_yes
.......wrote cred request yes ack.
.......\SMPDU_Sock_post_write
........\SMPDU_Sock_post_writev
......../SMPDU_Sock_post_writev
......./SMPDU_Sock_post_write
....../smpd_state_writing_cred_ack_yes
...../smpd_handle_op_write
.....sock_waiting for the next event.
.....\SMPDU_Sock_wait
...../SMPDU_Sock_wait
.....SOCK_OP_WRITE event.error = 0, result = 0, context=left
.....\smpd_handle_op_write
......\smpd_state_writing_account
.......wrote account: 'Utilisateur'
.......\smpd_encrypt_data
......./smpd_encrypt_data
.......\SMPDU_Sock_post_write
........\SMPDU_Sock_post_writev
......../SMPDU_Sock_post_writev
......./SMPDU_Sock_post_write
....../smpd_state_writing_account
...../smpd_handle_op_write
.....sock_waiting for the next event.
.....\SMPDU_Sock_wait
...../SMPDU_Sock_wait
.....SOCK_OP_WRITE event.error = 0, result = 0, context=left
.....\smpd_handle_op_write
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
.......\smpd_hide_string_arg
........\first_token
......../first_token
........\compare_token
......../compare_token
........\next_token
.........\first_token
........./first_token
.........\first_token
........./first_token
......../next_token
......./smpd_hide_string_arg
......./smpd_hide_string_arg
.......\SMPDU_Sock_post_read
........\SMPDU_Sock_post_readv
......../SMPDU_Sock_post_readv
......./SMPDU_Sock_post_read
......\smpd_hide_string_arg
.......\first_token
......./first_token
.......\compare_token
......./compare_token
.......\next_token
........\first_token
......../first_token
........\first_token
......../first_token
......./next_token
....../smpd_hide_string_arg
....../smpd_hide_string_arg
...../smpd_handle_op_write
.....sock_waiting for the next event.
.....\SMPDU_Sock_wait
...../SMPDU_Sock_wait
.....SOCK_OP_READ event.error = 0, result = 0, context=left
.....\smpd_handle_op_read
......\smpd_state_reading_process_result
.......read process session result: 'FAIL'
.......\smpd_hide_string_arg
........\first_token
......../first_token
........\compare_token
......../compare_token
........\next_token
.........\first_token
........./first_token
.........\first_token
........./first_token
......../next_token
......./smpd_hide_string_arg
......./smpd_hide_string_arg
.......\smpd_hide_string_arg
........\first_token
......../first_token
........\compare_token
......../compare_token
........\next_token
.........\first_token
........./first_token
.........\first_token
........./first_token
......../next_token
......./smpd_hide_string_arg
......./smpd_hide_string_arg
Credentials for Utilisateur rejected connecting to Benoit
.......process session rejected
.......\SMPDU_Sock_post_close
........\SMPDU_Sock_post_read
.........\SMPDU_Sock_post_readv
........./SMPDU_Sock_post_readv
......../SMPDU_Sock_post_read
......./SMPDU_Sock_post_close
.......\smpd_post_abort_command
........\smpd_create_command
.........\smpd_init_command
........./smpd_init_command
......../smpd_create_command
........\smpd_add_command_arg
......../smpd_add_command_arg
........\smpd_command_destination
.........0 -> 0 : returning NULL context
......../smpd_command_destination
Aborting: Unable to connect to Benoit
......./smpd_post_abort_command
.......\smpd_exit
........\smpd_kill_all_processes
......../smpd_kill_all_processes
........\smpd_finalize_drive_maps
......../smpd_finalize_drive_maps
........\smpd_dbs_finalize
......../smpd_dbs_finalize
........\SMPDU_Sock_finalize
......../SMPDU_Sock_finalize

C:\Users\Utilisateur>
> Hi,
>  Looks like you missed the "-" before the status ("smpd -status" not  
> "smpd status") argument.
>  It also looks like you have multiple MPI libraries installed in your  
> system. Try running this command (full path to mpiexec and smpd),
>
> # C:\Progra~1\MPICH2\bin\smpd -status
>
> # C:\Progra~1\MPICH2\bin\mpiexec -verbose -n 2  
> C:\Progra~1\MPICH2\examples\cpi.exe
>
>
> Regards,
> Jayesh
>
> ----- Original Message -----
> From: "spatiogis" <geo at spatiogis.fr>
> To: "Jayesh Krishna" <jayesh at mcs.anl.gov>
> Sent: Friday, May 3, 2013 11:05:34 AM
> Subject: Re: [mpich-discuss] install + config on windows
>
> Hello,
>
> C:\Users\Utilisateur>smpd status
> Unexpected parameters: status
>
> C:\Users\Utilisateur>mpiexec -verbose -n 2
> C:\Progra~1\MPICH2\examples\cpi.exe
> Unknown option: -verbose
>
> -----------------------------------------------------------------------------
> C:\Program Files\MPICH2\examples>mpiexec -verbose -n 2 cpi.exe
> Unknown option: -verbose
>
> C:\Program Files\MPICH2\examples>smpd status
> Unexpected parameters: status
> -----------------------------------------------------------------------------
>
> regards, Ben
>
>> Hi,
>>  Ok. Please send us the output of the following commands,
>>
>> # smpd -status
>> # mpiexec -verbose -n 2 C:\Progra~1\MPICH2\examples\cpi.exe
>>
>>  Please copy-paste the command and the complete output in your email.
>>
>> Regards,
>> Jayesh
>>
>>
>> ----- Original Message -----
>> From: "spatiogis" <geo at spatiogis.fr>
>> To: discuss at mpich.org
>> Sent: Friday, May 3, 2013 1:46:53 AM
>> Subject: Re: [mpich-discuss] install + config on windows
>>
>> Hello
>>
>>
>>> (PS: I am assuming from your reply in the previous email that you can
>>> run a command like "mpiexec -n 2 C:\Progra~1\MPICH2\examples\cpi.exe"
>>> correctly)
>>
>> 	In fact this command doesn't run.
>>
>> 	The message is this one
>>
>> 	[01:11728]....ERROR:unable to read the cmd header on the pmi context,
>> Error = -1
>>
>> 	Ben
>>
>>
>>> ----- Original Message -----
>>> From: "spatiogis" <geo at spatiogis.fr>
>>> To: "Jayesh Krishna" <jayesh at mcs.anl.gov>
>>> Sent: Thursday, May 2, 2013 10:48:56 AM
>>> Subject: Re: [mpich-discuss] install + config on windows
>>>
>>> Hello,
>>>
>>>> Hi,
>>>>  Are you able to run any other MPI programs? Try running the example
>>>> program, cpi.exe (C:\Program Files\MPICH2\examples\cpi.exe), to make
>>>> sure that your MPICH2 installation works.
>>>
>>> 	yes it does work
>>>
>>>>  Installing MPICH2 on Windows 7 typically requires you to uninstall  
>>>> any
>>>> previous versions of MPICH2, launch an administrative command promt  
>>>> and
>>>> run "msiexec /i mpich2-installer.msi" to install MPICH2.
>>>
>>> 	yes it 's been installed like this...
>>>
>>> 	In wmpiconfig, the message is the following in the 'Get settings'  
>>> line.
>>>
>>> 	Credentials for Utilisateur rejected connecting to host
>>> 	Aborting: Unable to connect to host
>>>
>>> 	The software I try to use is Taudem, which is intergrated inside Qgis.
>>> Launching a taudem process inside Qgis gives the same message.
>>>
>>>
>>>> Regards,
>>>> Jayesh
>>>
>>> 	Sincerely, Ben
>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "spatiogis" <geo at spatiogis.fr>
>>>> To: discuss at mpich.org
>>>> Sent: Thursday, May 2, 2013 10:08:23 AM
>>>> Subject: Re: [mpich-discuss] install + config on windows
>>>>
>>>> Hello,
>>>>
>>>> 	in my case Mpich is normally used to run .exe programs. I guess that
>>>> they
>>>> are already compiled...
>>>> 	The .exe files are integrated into a software, and accessed from  
>>>> menus
>>>> inside it. When I run one of the programs, the answer is actually
>>>> "unable
>>>> to query host".
>>>> 	At the end, the process is not realised. It seems that this 'host'
>>>> question is a problem to the software...
>>>>
>>>> 	Sincerely,
>>>>
>>>> 	Ben.
>>>>
>>>> 	
>>>>> Hi,
>>>>>  You can download MPICH2 binaries for Windows at
>>>>> http://www.mpich.org/downloads/ .
>>>>>  You need to compile your MPI programs with MPICH2 to make it work. I
>>>>> would recommend recompiling your code after you install MPICH2 (If  
>>>>> you
>>>>> have MPI program binaries pre-built with MPICH2 - instead of  
>>>>> compiling
>>>>> them on your own - make sure that you install the same version of
>>>>> MPICH2
>>>>> that was used to build the binaries).
>>>>>  The wmpiregister program has a bug and you can ignore this error
>>>>> message ("...unable to query host"). Can you run your MPI program
>>>>> using
>>>>> mpiexec from a command prompt?
>>>>>
>>>>> Regards,
>>>>> Jayesh
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "spatiogis" <geo at spatiogis.fr>
>>>>> To: discuss at mpich.org
>>>>> Sent: Tuesday, April 30, 2013 9:26:35 AM
>>>>> Subject: [mpich-discuss] install + config on windows
>>>>>
>>>>> Hello,
>>>>>
>>>>> 	I'm not very good at computing, but I would like to install Mpich2  
>>>>> on
>>>>> windows 7 - 64 bits. There is only one pc, with one user plus the
>>>>> admin,
>>>>> and a simple core processor.
>>>>>
>>>>> 	I would like to know if it's mandatory to have compiling softwares
>>>>> with
>>>>> it to make it work, whereas it is asked in this case only to make run
>>>>> another software, and not for compiling (that would maybe save some
>>>>> disk
>>>>> space and simplify the installation) ?
>>>>>
>>>>> 	My second issue is that I must be missing something about the server
>>>>> configuration. I have installed Mpich from the .msi file, then
>>>>> configured
>>>>> the wmpiregister program with the Domain/user informations.
>>>>>
>>>>> 	There is this message displayed when trying to connect in the
>>>>> 'configurable settings' window : 'MPICH2 not installed or unable to
>>>>> query
>>>>> the host'.
>>>>>
>>>>> 	What is the host actually ?
>>>>>
>>>>> 	I know I am starting from very far, I am sorry for these very simple
>>>>> questions. Thanks if you can reply me, that would certainly save me
>>>>> some
>>>>> long hours of reading and testing ;)
>>>>>
>>>>> 	sincerely,
>>>>>
>>>>> 	Ben
>>>>> _______________________________________________
>>>>> discuss mailing list     discuss at mpich.org
>>>>> To manage subscription options or unsubscribe:
>>>>> https://lists.mpich.org/mailman/listinfo/discuss
>>>>
>>>>
>>>
>>>
>>
>>
>
>


-- 
Benoit Véler
Adhérent au groupe JAM Ingénierie
180 Avenue du Genevois, Parc d'Activité de Croix Rousse
73000 Chambéry
http://www.spatiogis.fr
06-46-13-40-94
_______________________________________________
discuss mailing list     discuss at mpich.org
To manage subscription options or unsubscribe:
https://lists.mpich.org/mailman/listinfo/discuss

More information about the discuss mailing list