[mpich-discuss] Problems to install MPICH 3.4.1 in Ubuntu 20.04.2 LTS 64bits.

Jean Schuster jeanjschuster at gmail.com
Thu May 6 13:43:56 CDT 2021


Hi everyone.
I hope you are doing well.

My name is Jean Schuster and I'm from Brazil.

I'm facing some difficulties in installing Mpich 3.4.1 in my Ubuntu 20.04.2
LTS 64bits machine following the install guide. I'm getting stuck in the
6th step on the section 2.2, where it suppose to build the Mpich through
the "make" command (make 2>&1 | tee m.txt) when it returns mi te following
error:

  jean at Prandtl:/tmp/jean/mpich-3.4.1$ make 2>&1 | tee m.txt
  make: *** No targets specified and no makefile found.  Stop.

After running ./configure --prefix=/home/jean/mpich-install 2>&1 | tee
c.txt I get this message in the very end:

  configure: error: no ch4 netmod selected

  The default ch4 device could not detect a preferred network
  library. Supported options are ofi (libfabric) and ucx:

    --with-device=ch4:ofi or --with-device=ch4:ucx

  Configure will use an embedded copy of libfabric or ucx if one is
  not found in the user environment. An installation can be specified
  by adding

    --with-libfabric=<path/to/install> or --with-ucx=<path/to/install>

   to the configuration.

  The previous MPICH default device (ch3) is also available and
  supported with option:

    --with-device=ch3

And no Makefile is created on the source folder. The installation folder
/home/jean/mpich-install remains empty.

I'm a relatively new Ubuntu user, and despite the installation guide goes
step-by-step, I could not go through this error.
Attached follows the c.txt and config files from the temporary folder.
I hope you can kindly help me to get it to work.

Thank you in advance.

Best regards,
Jean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mpich.org/pipermail/discuss/attachments/20210506/a2c62a32/attachment-0001.html>
-------------- next part --------------
Configuring MPICH version 3.4.1 with  '-prefix=/home/jean/mpich-install'
Running on system: Linux Prandtl 5.8.0-50-generic #56~20.04.1-Ubuntu SMP Mon Apr 12 21:46:35 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for gcc option to accept ISO C99... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking whether make supports nested variables... yes
checking dependency style of gcc... gcc3
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make supports nested variables... (cached) yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for gfortran... gfortran
checking whether we are using the GNU Fortran compiler... yes
checking whether gfortran accepts -g... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking if gfortran supports -c -o file.o... (cached) yes
checking whether the gfortran linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking if gfortran supports -c -o file.o... (cached) yes
checking whether the gfortran linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
configure: RUNNING PREREQ FOR CH4 DEVICE
checking rdma/fabric.h usability... no
checking rdma/fabric.h presence... no
checking for rdma/fabric.h... no
checking for fi_getinfo in -lfabric... no
checking ucp/api/ucp.h usability... no
checking ucp/api/ucp.h presence... no
checking for ucp/api/ucp.h... no
checking for ucp_config_read in -lucp... no
configure: error: no ch4 netmod selected

  The default ch4 device could not detect a preferred network
  library. Supported options are ofi (libfabric) and ucx:

    --with-device=ch4:ofi or --with-device=ch4:ucx

  Configure will use an embedded copy of libfabric or ucx if one is
  not found in the user environment. An installation can be specified
  by adding

    --with-libfabric=<path/to/install> or --with-ucx=<path/to/install>

  to the configuration.

  The previous MPICH default device (ch3) is also available and
  supported with option:

    --with-device=ch3
    
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config.system
Type: application/octet-stream
Size: 128 bytes
Desc: not available
URL: <http://lists.mpich.org/pipermail/discuss/attachments/20210506/a2c62a32/attachment-0002.obj>
-------------- next part --------------
make: *** No targets specified and no makefile found.  Stop.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config.log
Type: application/octet-stream
Size: 66480 bytes
Desc: not available
URL: <http://lists.mpich.org/pipermail/discuss/attachments/20210506/a2c62a32/attachment-0003.obj>


More information about the discuss mailing list