[mpich-discuss] MPE is available in mpich-3.0.4 ? rlog doesn't work in configure process.

Mon Jun 10 12:56:53 CDT 2013

I don't think there's anything wrong with this, but can you confirm
that the following does not work?

./configure --prefix=/home/fernando_luz/usr/mpe
--with-mpicc=/home/fernando_luz/usr/mpich/bin/mpicc --disable-f77

I would expect that --with-mpicc is sufficient and that mpilibs and
mpiinc can be populated automatically using this information.

Jeff

On Mon, Jun 10, 2013 at 8:26 AM, fernando_luz <fernando_luz at tpn.usp.br> wrote:
> I made this modification in configure and I have success
>
> ./configure --prefix=/home/fernando_luz/usr/mpe
> --with-mpicc=/home/fernando_luz/usr/mpich/bin/mpicc
> --with-mpilibs=-L/home/fernando_luz/usr/mpich/lib/
> --with-mpiinc=-I/home/fernando_luz/usr/mpich/include/ --disable-f77
>
> but it's the correct way to execute the configure?
>
> Regards
>
>
> On 06/10/2013 11:16 AM, fernando_luz wrote:
>
> Hi Jeff and Antonio,
>
>
> I checked my mpich installation and everything is ok.
>
> I used the variables CC=mpicc and MPI_CC=mpicc and I don't have any success.
>
> Looking the log, my guess is the command to link the conftest.c wasn't built
> in a correct way, because the Include flag '-I' and the library path '-L'
> was not inserted in the command line.
>
> configure:4099: /home/fernando_luz/usr/mpich/bin/mpicc -o conftest
> /home/fernando_luz/usr/mpich/include/    conftest.c
> /home/fernando_luz/usr/mpich/lib/ >&5
>
> Running this command in the terminal (with -I and -L) I have success.
>
> It's my first time using the autoconf, and I don't have an idea where I can
> modify this.
>
> Regards
>
>  On 06/07/2013 07:38 PM, Jeff Hammond wrote:
>
> Did you read it? It's got the reason that configure is failing pretty
> clearly stated. You need to debug your configure invocation. Maybe use
> CC=mpicc etc instead...
>
> Jeff
>
> Sent from my iPhone
>
> On Jun 7, 2013, at 3:04 PM, fernando_luz <fernando_luz at tpn.usp.br> wrote:
>
> In attachment.
>
> Fernando
>
> On 06/07/2013 04:56 PM, Jeff Hammond wrote:
>
> please attach config.log.
>
> jeff
>
> On Fri, Jun 7, 2013 at 1:07 PM, fernando_luz <fernando_luz at tpn.usp.br>
> wrote:
>
> Hi Rajeev,
>
> Thanks for the answers.
>
> I get the source code in repository, but I didn't succeed in the compile
> process.
> I ran the autogen.sh and after this I tried to configure my installation and
> I received the following error message.
>
>
> fernando_luz at TPN000300:~/git/mpe$ ./configure
> --prefix=/home/fernando_luz/usr/mpe
> --with-mpicc=/home/fernando_luz/usr/mpich/bin/mpicc
> --with-mpilibs=/home/fernando_luz/usr/mpich/lib/
> --with-mpiinc=/home/fernando_luz/usr/mpich/include/
> Configuring MPE Profiling System with '--prefix=/home/fernando_luz/usr/mpe'
> '--with-mpicc=/home/fernando_luz/usr/mpich/bin/mpicc'
> '--with-mpilibs=/home/fernando_luz/usr/mpich/lib/'
> '--with-mpiinc=/home/fernando_luz/usr/mpich/include/'
> 'MPI_CC=/home/fernando_luz/usr/mpich/bin/mpicc'
> 'MPI_INC=/home/fernando_luz/usr/mpich/include'
> 'MPI_LIBS=/home/fernando_luz/usr/mpich/lib'
> checking for current directory name... /home/fernando_luz/git/mpe
> checking gnumake... yes using --no-print-directory
> checking BSD 4.4 make... no - whew
> checking OSF V3 make... no
> checking for virtual path format... VPATH
> User supplied MPI implmentation (Good Luck!)
> checking for leftover Makefiles in subpackages ... none
> checking for gcc... cc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for cc option to accept ISO C89... none needed
> checking whether MPI_CC has been set ...
> /home/fernando_luz/usr/mpich/bin/mpicc
> checking whether we are using the GNU Fortran 77 compiler... no
> checking whether f77 accepts -g... no
> checking whether MPI_F77 has been set ... f77
> checking for the linkage of the supplied MPI C definitions ... no
> configure: error:  Cannot link with basic MPI C program!
>      Check your MPI include paths, MPI libraries and MPI CC compiler
>
> Where /home/fernando_luz/usr/mpich/ is my mpi installation (MPICH-3.0.4).
>
> I prefer to use the mpe in repository because in the site, the last version
> was dated in 2010 and in the git repository the last commit was in 2012.
>
> Regards
>
> Fernando
>
>
>
> On 06/04/2013 03:05 PM, Rajeev Thakur wrote:
>
> It can be downloaded from
> http://www.mcs.anl.gov/research/projects/perfvis/download/index.htm.
>
> The source repository is at http://git.mpich.org/mpe.git/
>
> Rajeev
>
> On Jun 4, 2013, at 12:48 PM, Jeff Hammond wrote:
>
> MPE isn't actively developed and should sit strictly on top of any MPI
> implementation so you can just grab MPE from an older release of
> MPICH.
>
> My guess is that MPE will be a standalone download at some point in the
> future.
>
> Jeff
>
> On Tue, Jun 4, 2013 at 10:59 AM, fernando_luz <fernando_luz at tpn.usp.br>
> wrote:
>
> Hi,
>
> I didn't find the MPE source in mpich-3.0.4 package. Where I can
> download
> the source? It is still compatible with mpich?
>
> And I tried to install the logging support available in this release,
> but my
> try didn't was successful. I received the follow error:
>
> /home/fernando_luz/software/mpich-3.0.4/src/util/logging/rlog/configure:
> line 3694: PAC_CC_SUBDIR_SHLIBS: command not found
> configure: creating ./config.status
> config.status: error: cannot find input file: `Makefile.in'
> configure: error: src/util/logging/rlog configure failed
>
> I attached the c.txt file used in the configuration.
>
> Regards
>
> Fernando
>
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
>
>
> --
> Jeff Hammond
> Argonne Leadership Computing Facility
> University of Chicago Computation Institute
> jhammond at alcf.anl.gov / (630) 252-5381
> http://www.linkedin.com/in/jeffhammond
> https://wiki.alcf.anl.gov/parts/index.php/User:Jhammond
> ALCF docs: http://www.alcf.anl.gov/user-guides
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
>
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
>
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
>
>
> <config.log>
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
>
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
>
>
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss
>
>
>
> _______________________________________________
> discuss mailing list     discuss at mpich.org
> To manage subscription options or unsubscribe:
> https://lists.mpich.org/mailman/listinfo/discuss

-- 
Jeff Hammond
Argonne Leadership Computing Facility
University of Chicago Computation Institute
jhammond at alcf.anl.gov / (630) 252-5381
http://www.linkedin.com/in/jeffhammond
https://wiki.alcf.anl.gov/parts/index.php/User:Jhammond
ALCF docs: http://www.alcf.anl.gov/user-guides